Skip to content

Quick comparison table

Description

The stand features an adjustable height between 11 to 15.74", and includes two cable clips and a 3/8 to 5/8" adapter.

The slip-on design of the WS6 features dimensions that accommodate the Rode NTG1, NTG2, NTG4 and NTG4+ microphones; as well as any shotgun or stereo mic with a length of 160.5 mm and diameter of 22.5 mm.

Additionally, it is extremely easy to use and the adjustable arm will give you full 360 degree access to your mic. You can move the arm around as you like, with horizontal and vertical radius of nearly 85 centimetres. PSA1 can easily hold mics weighing up to 1.08 kilograms and the included touch fastener straps will let you not trip over the cables. Also, Rode PSA1 package comes with a set of hardware that will provide you several mounting options for your PSA1.

It is sized specifically to fit the VideoMic NTG, and it reduces wind noise and plosives when slipped over the microphone.

The pole uses a 3/8" industry-standard thread and is designed to fit SM3 Shockmounts, RMS Stand Mounts (NT5, NTG1 & NTG2), and VideoMic. The five-section pole collapses down to 0.84m (33") for easy portability.

The mount has a cylindrical 27mm diameter clamp that perfectly fits into the cylindrical clamp mounts found on most professional video cameras. Also, the SM5 has a two-way mounting system with 0.64 x 20 and 0.95 x 16 internal threads for two different types of mounting (Tripo and Boom Pole). Secure hold of your mic and maximum handling noise reduction will be provided by the four-way rubber suspension bands. You surely want best support for your Rode mic, and this is precisely why you should Rode accessories to do the job.

The pole has been optimized for use with the VideoMicro microphone (sold separately) and using a standard 3/8" thread, these sections can also be used to extend the Boompole Pro to reach over 3.7m (12') in length.

Designed for the Rode Podcaster mic, Rode's PSM1 Shockmount is a superb protection against unnecessary noises in your recordings, that is often caused by movement, vibration or natural sounds. The PSM1 can be mounted to 0.95cm as well as 1.58cm thread mounts.

Whether attached to a table via the supplied C-clamp or installed in a surface using the included threaded desk insert, the PSA1+ can support microphones weighing up to 2.7 pounds; even large broadcast mics are no problem for the PSA1+ arm. It comes with a 3/8 to 5/8" adapter to allow compatibility with most microphones and shockmounts on the market, and it boasts integrated cable management that'll keep your existing USB or XLR cable from becoming an unruly and unsightly mess.

Holds Popular Rode Microphones

The PSA1+ is compatible with all Rode mics and shockmounts excluding lavalier, mobile, wireless, and headset microphones and the SM5 shockmount.
  • PodMic
  • Podcaster
  • Procaster
  • Broadcaster
  • NT1
  • NT1-A
  • NT-USB
  • NT-USB Mini
  • VideoMic NTG
  • XDM-100
  • XCM-50

Supports Heavy Mics

With a load capacity ranging from 0.2 to 2.7 lb, the PSA1+ is more than capable of accommodating most microphones whether small and light or large and hefty. It features a 3/8" thread and includes a 5/8" adapter to ensure compatibility with the vast majority of mics, clips, and mounts.

Smooth, Silent Mic Positioning

Thanks to its silent operation and 360 degrees of rotation, the PSA1+ allows effortless and thoroughly versatile positioning of your microphone. Considering its horizontal reach of 37" and vertical reach of 34", you'll have no problem putting the mic right where you need it.

Integrated Cable Management

The PSA1+ features integrated cable management with external clips to keep your cable run neat and orderly. Plus, it accommodates USB or XLR cables, so it's sure to work with your digital or analog microphone cable.

Multiple Mounting Options

To enable optimal mounting to a desk or table, the PSA1+ is supplied with a C-clamp and a threaded desk insert. The clamp can attach to surfaces up to 2.2" thick, while the desk insert works with surfaces up to 2.7" thick.
Price
Regular price 326 kr
Sale price 326 kr Regular price
Regular price 551 kr
Sale price 551 kr Regular price
Regular price 1 068 kr
Sale price 1 068 kr Regular price
Regular price 439 kr
Sale price 439 kr Regular price
Regular price 1 338 kr
Sale price 1 338 kr Regular price
Regular price 338 kr
Sale price 338 kr Regular price 506 kr
Regular price 1 181 kr
Sale price 1 181 kr Regular price
Regular price 506 kr
Sale price 506 kr Regular price
Regular price 1 563 kr
Sale price 1 563 kr Regular price
Product variants
Vendor Lekti Lekti Lekti Lekti Lekti Lekti Lekti Lekti Lekti
Type Microphone Stands Microphone Stands Microphone Stands Microphone Stands Microphone Stands

Why Soundium?

Customer Support

Yes, we know, that customer support is cruetial. We understand what we sell, so it's easier to help you.

Quick Delivery

Use this section to explain a set of product features, to link to a series of pages, or to answer common questions about your products.

Since 2011

Soundium started in 2011 (as we remember). From day one - our mission & passion was to work in propper music store. So we work now. at here.